with water window on housing double wall water kettle

injected PP housing mini glass kettles with water window

Product Features:

• material of outside body is injected PP and inside wall is glass
• mini size electric kettle with self made controller
• special design with both sides water windows
• LED blue light on both water windows showing the working state
• morden electric cordless kettle with three functions including automatically switch off,boil dry protection and over heat protection
• automatically switch off system to comes no one watch when it is boiling
• food grade material without any heavy metal

Product Picture:

The color of outside PP can be changed according to your requirement.

SPECIFICATION:

Structure

Packaging & shipping

Some packing picture of our electric kettle for your reference

• Our product shall be packed with plastic bag and cardboard,then pack it into a gift

box according to normal packing method.

• Unless otherwise specified,all of our products must pass the drop test conducted by our company.
• The packaging detail shall be referred to Packing Directive.

GB size: 200X200X300MM

Carton size: 615X415X310MM (6PCS/CTN)

The plugs those we can exported

Our electric kettle can be exported to below market, only need to change the plug to related market.

Factory Profile:

Leifan electric appliance factory is focus on developing and selling all kinds of kettles from 2010,

such as stainless steel kettle,stainless steel keep warm kettle,glass kettle with single wall and double wall,plastic kettles ...

the following factory we are going to introduce is controller factory of leifan,

it's focus on developing controller with many years experience,

Our controllers include

• double-metal waterproof controller
• double-metal non-water-tight controller
• single-metal non-water-tight controller

Certification

Quality control

External inspection

1. All plastic parts shall be bright and free of defects such as impurity, sharp edge, flow mark, shrinkage, missing, flash, scratch and whitening etc.
2. The unit colors must be consistent or per the sample or customer’s requirement. (in 0.5m natural ray)
3. The heating plate shall be high grind-finished and free of scratch and rust etc.
4. Mating surface shall maintain consistency of fit along adjoining surfaces and free of looseness and deformation. For the length of fit, gap shall be less than 0.8mm, warpage shall be less than 1.0mm, and displacement shall be less than 0.7mm.
5. All printings shall be clear, legible, complete, secure and in place.

Electrical strength

1. The unit is operated at rated voltage in normal condition and the wattage shall be measured within +5%-10% of rated wattage.
2. Product Tags:

   wall mounted water boiler

   water wall in boiler

   boiler water wall