concealed heating element 1.2 liter mini portable kettle

1.2L Food grade stainless steel electric kettle

Product image

Product Features:

1.360° rotational double wall kettle

2.water gauge on transparent housing

3.over heat protection and boil-dry protection prevent you from any harm

4.portable PP handle on kettle for easy to carry

5.cord storage design

6.anti-scald design kettle in order to protect children

7.no one watch when it is working with the function of automatically turns off

8.unique kettle with our own brand controller

SPECIFICATION:

Base specification of electric ketle LF7009 as below, it is base price.

Other detailed specification those you maybe interest:

Structure

Structures of electric kettle is very simple, you can refer to below description.

Cirduit diagram

Plugs available for your reference

Packin g & shipping

Kettle with RL + power base with plug and cord + manula + warranty card

one pce kettle into giftbox;

six fiftbox into one carton.

Some packing picture of our electric kettle for your reference

Factory Profile

Leifan electric appliance factory is focus on developing and selling all kinds of kettles from 2010,

such as stainless steel kettle,stainless steel keep warm kettle,glass kettle with single wall and double wall,plastic kettles ...

the following factory we are going to introduce is controller factory of leifan,

it's focus on developing controller with many years experience,

Our controllers include

• double-metal waterproof controller
• double-metal non-water-tight controller
• single-metal non-water-tight controller

Certification

Quality control

External inspection

1. All plastic parts shall be bright and free of defects such as impurity, sharp edge, flow mark, shrinkage, missing, flash, scratch and whitening etc.
2. The unit colors must be consistent or per the sample or customer’s requirement. (in 0.5m natural ray)
3. The heating plate shall be high grind-finished and free of scratch and rust etc.
4. Mating surface shall maintain consistency of fit along adjoining surfaces and free of looseness and deformation. For the length of fit, gap shall be less than 0.8mm, warpage shall be less than 1.0mm, and displacement shall be less than 0.7mm.
5. All printings shall be clear, legible, complete, secure and in place.

Electrical strength

1. The unit is operated at rated voltage in normal condition and the wattage shall be measured within +5%-10% of rated wattage.
2. The unit shall be capable of withstanding the 1000V hi-pot test for a period of 2S.
3. The unit must pass the DC12V/25A ground resistance test between the grounding metal surfaces of the plug. The resistance measured shall not exceed 0.1Ω.
4. Run the unit at 1.15 times the rated power. After stabilization, conduct the current leakage test on the unit and it shall not exceed 0.75mA.

Life test

The unit must be capable of withstanding the life test without mechanical or electrical breakdown.

The test detail shall be referred to the Operation Directive from the Quality Assurance Test Center.

Strength test for welding Controller

Press less than 80N power with 90º for Welding position(as below picture)

Our service