1.5L 360 degree rotational double walls kettle

220-240V/50HZ/1850-2200W;120V/60HZ/1500W;
Capacity: 1.7L;
360°rotational stainless steel kettle;
Automatically lid-opening future;
With light indicator(ring) on water window showing the working state;
Automatically turns off when water boils;
With boil-dry protection;
concealed heating element;
Anti-slip feet design;
cord storage,chormed outlook on base.

External inspection

1. All plastic parts shall be bright and free of defects such as impurity, sharp edge, flow mark, shrinkage, missing, flash, scratch and whitening etc.

2. The unit colors must be consistent or per the sample or customer’s requirement. (in 0.5m natural ray)

3. The heating plate shall be high grind-finished and free of scratch and rust etc.

4. Mating surface shall maintain consistency of fit along adjoining surfaces and free of looseness and deformation. For the length of fit, gap shall be less than 0.8mm, warpage shall be less than 1.0mm, and displacement shall be less than 0.7mm.

5. All printings shall be clear, legible, complete, secure and in place.

Electrical strength

1.The unit is operated at rated voltage in normal condition and the wattage shall be measured within +5%-10% of rated wattage.

2.The unit shall be capable of withstanding the 1000V hi-pot test for a period of 2S.

3.The unit must pass the DC12V/25A ground resistance test between the grounding metal surfaces of the plug. The resistance measured shall not exceed 0.1Ω.

4.Run the unit at 1.15 times the rated power. After stabilization, conduct the current leakage test on the unit and it shall not exceed 0.75mA.

Life test

The unit must be capable of withstanding the life test without mechanical or electrical breakdown. The test detail shall be referred to the Operation Directive from the Quality Assurance Test Center.